Medical-Grade Air Filtration Designed for Immune Support
Indoor air often contains more than dust. Mold fragments, volatile organic compounds (VOCs), household chemicals, and airborne microbes can circulate continuously inside modern homes — even in clean, well-maintained spaces.
The Austin Air Immunity Machine is engineered to reduce airborne contaminants that may contribute to immune stress and environmental inflammatory load.
This is not a consumer-grade purifier. It is a high-capacity, medical-grade system built for continuous, long-term air filtration.
What Makes The Immunity Machine Different
The Immunity Machine combines multiple filtration technologies in a single, heavy-duty steel housing:
Medical-Grade HEPA Filtration
Removes 99.97% of airborne particles down to 0.3 microns, including dust, pollen, mold spores, and fine particulates.
High-Capacity Activated Carbon + Zeolite
Absorbs VOCs, chemical fumes, gases, and odors.
Military-Grade HEGA Carbon Cloth
Designed for enhanced adsorption of microbial and chemical contaminants.
Long Filter Life
Filters are designed to last up to 5 years under normal residential use.
Who It’s Designed For
The Immunity Machine is commonly chosen by households seeking support for:
Mold sensitivity
Environmental allergies
Immune resilience
Chemical sensitivity
Asthma-prone environments
Urban or high-pollution areas
General indoor air quality improvement
For individuals prioritizing long-term health optimization, environmental air quality is a foundational component.
Recommended Coverage
Air purification is most effective when coverage matches how your home is used.
Most households begin with two units:
✔ One unit in the primary bedroom
✔ One unit in the main living area
Additional units may be appropriate for secondary bedrooms, nurseries, or home offices.
Starting with the bedroom is often recommended, as this is where you spend 6–8 continuous hours each night.
Built for Continuous Operation
The Immunity Machine is designed to run 24/7.
Quiet multi-speed operation and durable steel construction allow it to function as a permanent part of your home environment.
This is an investment in long-term air quality — not a temporary fix.
Why Consider Medical-Grade Filtration?
Many smaller consumer purifiers focus primarily on particle filtration. The Immunity Machine is engineered to address both particulates and gaseous pollutants through its high-capacity carbon system.
For those seeking more comprehensive indoor air management, higher filtration mass and deeper adsorption capacity matter.
Built by a Trusted U.S. Manufacturer
Austin Air Systems has been manufacturing air purification systems in the United States for more than 30 years. Every unit is assembled in Buffalo, New York, using durable steel construction and high-capacity filtration media.
Key advantages:
Made in the USA
Over three decades of air purification expertise
Durable steel housing (not plastic)
Designed for long-term residential and clinical use
Ships directly to your home securely packaged and delivered ready to operate with minimal setup.
Air Purification for Mold Spores and Indoor Air Quality
Indoor air can contain a variety of microscopic particles including dust, pollen, mold spores, and other airborne contaminants. Many households searching for an air purifier for mold particles choose high-quality HEPA filtration systems like the Austin Air Immunity Machine are designed to capture extremely small particles that circulate throughout indoor environments.
For households concerned about indoor air quality — particularly in environments where allergens, mold spores, or environmental irritants may be present — advanced air purification can help reduce airborne particles and support a cleaner indoor environment.
Frequently Asked Questions
Can HEPA filtration capture mold spores?
HEPA filters are designed to capture extremely small airborne particles, including many types of spores and allergens that circulate in indoor environments.
Where should an air purifier be placed first?
Many households place their first purifier in the bedroom since this is where most people spend the longest continuous time breathing indoor air.
Disclaimer: This product is designed to improve indoor air quality and is not intended to diagnose, treat, cure, or prevent any disease. Orders ship directly from the manufacturer and are subject to manufacturer warranty and policies.
Medical-Grade Air Filtration Designed for Immune Support
Indoor air often contains more than dust. Mold fragments, volatile organic compounds (VOCs), household chemicals, and airborne microbes can circulate continuously inside modern homes — even in clean, well-maintained spaces.
The Austin Air Immunity Machine is engineered to reduce airborne contaminants that may contribute to immune stress and environmental inflammatory load.
This is not a consumer-grade purifier. It is a high-capacity, medical-grade system built for continuous, long-term air filtration.
What Makes The Immunity Machine Different
The Immunity Machine combines multiple filtration technologies in a single, heavy-duty steel housing:
Medical-Grade HEPA Filtration
Removes 99.97% of airborne particles down to 0.3 microns, including dust, pollen, mold spores, and fine particulates.
High-Capacity Activated Carbon + Zeolite
Absorbs VOCs, chemical fumes, gases, and odors.
Military-Grade HEGA Carbon Cloth
Designed for enhanced adsorption of microbial and chemical contaminants.
Long Filter Life
Filters are designed to last up to 5 years under normal residential use.
Who It’s Designed For
The Immunity Machine is commonly chosen by households seeking support for:
Mold sensitivity
Environmental allergies
Immune resilience
Chemical sensitivity
Asthma-prone environments
Urban or high-pollution areas
General indoor air quality improvement
For individuals prioritizing long-term health optimization, environmental air quality is a foundational component.
Recommended Coverage
Air purification is most effective when coverage matches how your home is used.
Most households begin with two units:
✔ One unit in the primary bedroom
✔ One unit in the main living area
Additional units may be appropriate for secondary bedrooms, nurseries, or home offices.
Starting with the bedroom is often recommended, as this is where you spend 6–8 continuous hours each night.
Built for Continuous Operation
The Immunity Machine is designed to run 24/7.
Quiet multi-speed operation and durable steel construction allow it to function as a permanent part of your home environment.
This is an investment in long-term air quality — not a temporary fix.
Why Consider Medical-Grade Filtration?
Many smaller consumer purifiers focus primarily on particle filtration. The Immunity Machine is engineered to address both particulates and gaseous pollutants through its high-capacity carbon system.
For those seeking more comprehensive indoor air management, higher filtration mass and deeper adsorption capacity matter.
Built by a Trusted U.S. Manufacturer
Austin Air Systems has been manufacturing air purification systems in the United States for more than 30 years. Every unit is assembled in Buffalo, New York, using durable steel construction and high-capacity filtration media.
Key advantages:
Made in the USA
Over three decades of air purification expertise
Durable steel housing (not plastic)
Designed for long-term residential and clinical use
Ships directly to your home securely packaged and delivered ready to operate with minimal setup.
Air Purification for Mold Spores and Indoor Air Quality
Indoor air can contain a variety of microscopic particles including dust, pollen, mold spores, and other airborne contaminants. Many households searching for an air purifier for mold particles choose high-quality HEPA filtration systems like the Austin Air Immunity Machine are designed to capture extremely small particles that circulate throughout indoor environments.
For households concerned about indoor air quality — particularly in environments where allergens, mold spores, or environmental irritants may be present — advanced air purification can help reduce airborne particles and support a cleaner indoor environment.
Frequently Asked Questions
Can HEPA filtration capture mold spores?
HEPA filters are designed to capture extremely small airborne particles, including many types of spores and allergens that circulate in indoor environments.
Where should an air purifier be placed first?
Many households place their first purifier in the bedroom since this is where most people spend the longest continuous time breathing indoor air.
Disclaimer: This product is designed to improve indoor air quality and is not intended to diagnose, treat, cure, or prevent any disease. Orders ship directly from the manufacturer and are subject to manufacturer warranty and policies.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5